Support

If you have a problem or need to report a bug please email : support@dsprobotics.com

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

Blue One-Shot or Mono-Stable

Post any examples or modules that you want to share here

Blue One-Shot or Mono-Stable

Postby BobF » Thu Feb 08, 2018 7:54 pm

BobsLoopedOneshots.fsm
(514.91 KiB) Downloaded 1273 times

Hello Gang,

Here is a blue mono-stable or one-shot for you all to play with. The loop is for demo only, just to show off some of its timing functionality. There are two trigger inputs, one for positive going triggers and one for negative going triggers. The non-invert/invert must be green to use the negative trigger. There are three outputs, one is the Resistor/Capacitor output and the other two are a positive output and a negative output. The trigger button does just that, it triggers the one-shot. You select the timing via the Resistor and Capacitor value selectors. There is also a knob for fine tuning your timing if needed. I have selected a fairly wide range of values, but of course you can go inside the schematic and make changes as you desire. The looped demo locked up on my pc every once in a while, but NOT often. If it DOES, just break the loop and then reconnect it.
Hope you enjoy this and can find some uses for it. PLEASE if you do find some great uses for it, or make any mods or corrections, or have questions please post them. One great mod would be to calibrate the timing if anyone would like to take on that challenge.

Till next time, BobF....
BobF
 
Posts: 598
Joined: Mon Apr 20, 2015 9:54 pm

Return to User Examples

Who is online

Users browsing this forum: Google [Bot] and 28 guests