Support

If you have a problem or need to report a bug please email : support@dsprobotics.com

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

FlowBoard Mini

FlowBoard Mini

Postby admin » Fri Dec 20, 2013 11:16 am

Here is our FlowBoard Mini project where you can get signals in and out of FlowStone using this low cost new PIC Clicker board from MikroElektronika from only $19 USD!

FlowBoard Mini Pinout LR.jpg
FlowBoard Mini Pinout LR.jpg (284.49 KiB) Viewed 48118 times


FlowBoard Mini HID clip-2.png
FlowBoard Mini HID clip-2.png (166.33 KiB) Viewed 48118 times


To program the blank board you need the free HID Bootloader app from here:http://www.mikroe.com/eng/downloads/get/1570/mikrobootloader_usbhid_v210.zip

Here are the instructions : http://www.mikroe.com/eng/downloads/get/1569/mikrobootloader_usb_manual_v100.pdf

It really easy, basically you connect the board via USB, connect using their Bootloader app (within the first few seconds), select the FlowBoard Mini.hex file from the source code files. Then press upload and your done, it will now be programmed to work as the FlowBoard Mini!

You can buy this board from here: http://www.mikroe.com/pic/clicker/

Here are the Beta files (Note: on the Beta version DI2,3,4 & DO5 are not implemented yet):
Attachments
FlowBoard Mini.zip
Source Code and Hex firmware file
(150.72 KiB) Downloaded 3305 times
FlowBoard Mini HID.fsm
FlowBoard Mini FlowStone project
(456.9 KiB) Downloaded 3309 times
User avatar
admin
Site Admin
 
Posts: 231
Joined: Tue May 11, 2010 6:30 pm

Return to FlowBoard

Who is online

Users browsing this forum: No registered users and 2 guests

cron