Support

If you have a problem or need to report a bug please email : support@dsprobotics.com

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

LabJack U3-HV Test

LabJack U3-HV Test

Postby admin » Thu Nov 17, 2011 8:43 pm

This is a simple test example of how to set up the LabJack U3-HV DAQ system.

LabJack U3-HV.JPG
LabJack U3-HV.JPG (100.14 KiB) Viewed 40657 times


The I/O is a set of strings starting "DI", "DO" or "AI" for digital in, out and analogue in respectively. After that there's a number to identify the pin. In the case of analogue it defaults to single ended but you can set the neg. channel with a minus symbol followed by "SE","SP","VR" or the number of the pin you want to have as the neg. channel.

The timer string is in the form {number of timers} {clock{/divisor}} {mode timer0} {value timer0} {{mode timer1} {value timer1}}

Modes are strings and map onto your modes exactly so can be one of the following PWM16, PWM8, RISINGEDGES32, FALLINGEDGES32, DUTYCYCLE, FIRMCOUNTER, FIRMCOUNTERDEBOUNCE, FREQOUT, QUAD, TIMERSTOP, SYSTIMERLOW, SYSTIMERHIGH, SYSTIMERHIGH, RISINGEDGES16 or FALLINGEDGES16.

LabJack Test clip.png
LabJack Test clip.png (85.13 KiB) Viewed 40657 times
Attachments
LabJack Test.fsm
(542 Bytes) Downloaded 3218 times
User avatar
admin
Site Admin
 
Posts: 231
Joined: Tue May 11, 2010 6:30 pm

Return to LabJack

Who is online

Users browsing this forum: No registered users and 1 guest

cron