Support

If you have a problem or need to report a bug please email : support@dsprobotics.com

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

Vostok - An analogue polyphonic synthesizer

Post any examples or modules that you want to share here

Vostok - An analogue polyphonic synthesizer

Postby Halon » Sun Mar 21, 2021 6:37 am

Haven't been here for a while, so decided to share something i'm working on at the moment. It's inspired by the Yamaha CS-60/80 and a fictitious synthesizer from the USSR that might have been made back then. I have always been intrigued by the synthesizers from the USSR. Anyway as mentioned above, i am still working on it, and i am also having a few problems such as most of the preset parameters doesn't show up in my DAW (presets are still saved with all the correct settings inside FlowStone) and i am also having a problem with the
pitch bend module < using pitch bend to modulate cutoff, vibrato etc. So if anyone could have a peek inside the schematic (its a bit of a spaghetti mess atm) i would be very grateful.

Cheers!

Image
Attachments
Vostok -spogged 2 .fsm
The Absolute Final Version
(981.8 KiB) Downloaded 894 times
Last edited by Halon on Sat Apr 03, 2021 10:12 pm, edited 3 times in total.
Halon
 
Posts: 321
Joined: Sat Nov 28, 2015 4:42 pm
Location: Norway

Re: Vostok - An analogue polyphonic synthesizer

Postby Spogg » Sun Mar 21, 2021 10:06 am

That’s a nice synth!

I’ve spogged it a bit:


1) In the preset properties Auto was not checked for any controls, so I set it. Automation should now work in a DAW (but I didn’t test it).
Just for info this was done in a few seconds for all 70 sliders and knobs. I synchronised all the preset modules, disconnected the bool for Auto, changed it to True and reconnected it then unsynchronised all. That way all the knobs were changed at once (but please check!).


2) I added a module that puts out -1 to 1 for the Pitchbend wheel going over its whole sweep range. I connected it to the PB output and set Program 1 so the PB wheel also controls modulation and cutoff frequency to demo that it works. If you want 0 to 1 I’m sure you’ll see what to do.

I hope I got the right end of the stick and this is what you wanted!
Attachments
Vostok -spogged 2_.zip
3.06
(1.66 MiB) Downloaded 996 times
User avatar
Spogg
 
Posts: 3318
Joined: Thu Nov 20, 2014 4:24 pm
Location: Birmingham, England

Re: Vostok - An analogue polyphonic synthesizer

Postby Halon » Sun Mar 21, 2021 10:32 am

Fantastic! Thank you for the help spogg! :D So 'Auto' was not checked, that was the problem then. :oops:

Also thank you for the help with the PB module, exactly what i wanted! :D

Have a nice day,
Cheers.
Halon
 
Posts: 321
Joined: Sat Nov 28, 2015 4:42 pm
Location: Norway

Re: Vostok - An analogue polyphonic synthesizer

Postby Duckett » Mon Mar 22, 2021 3:07 pm

Thanks for posting, very nice!
We have to train ourselves so that we can improvise on anything... a bird, a sock, a fuming beaker! This, too, can be music. Anything can be music. -Biff Debris
User avatar
Duckett
 
Posts: 132
Joined: Mon Dec 14, 2015 12:39 am

Re: Vostok - An analogue polyphonic synthesizer

Postby Halon » Tue Mar 23, 2021 1:18 am

Thank you Duckett :D Final version coming soon
Halon
 
Posts: 321
Joined: Sat Nov 28, 2015 4:42 pm
Location: Norway

Re: Vostok - An analogue polyphonic synthesizer

Postby Halon » Thu Mar 25, 2021 10:37 am

Final version is up now. Added an external input for processing other synthesizers in your favorite DAW, added a delay parameter to the LFO, pitch drift and a noise and hum module (on the output) i borrowed from spogg's A.S.S synth.

Hope you like it and enjoy!

Cheers, Espen.
Halon
 
Posts: 321
Joined: Sat Nov 28, 2015 4:42 pm
Location: Norway

Re: Vostok - An analogue polyphonic synthesizer

Postby DaveyBoy » Thu Mar 25, 2021 11:56 am

Halon wrote:a noise and hum module (on the output) i borrowed from spogg's A.S.S


There's got to be a joke in there somewhere :lol:
User avatar
DaveyBoy
 
Posts: 131
Joined: Wed May 11, 2016 9:18 pm
Location: Leeds UK

Re: Vostok - An analogue polyphonic synthesizer

Postby Halon » Thu Mar 25, 2021 2:16 pm

DaveyBoy wrote:
Halon wrote:a noise and hum module (on the output) i borrowed from spogg's A.S.S


There's got to be a joke in there somewhere :lol:


Well spogg made a synth called A.S.S a couple of years ago, A.S.S = 'Analogue Sounding Synth' > A.S.S' :D
Halon
 
Posts: 321
Joined: Sat Nov 28, 2015 4:42 pm
Location: Norway

Re: Vostok - An analogue polyphonic synthesizer

Postby Spogg » Sun Mar 28, 2021 2:02 pm

Very nicely done Halon! Looks great and the 10 presets sound nice.

Thank you for sharing your work here.
User avatar
Spogg
 
Posts: 3318
Joined: Thu Nov 20, 2014 4:24 pm
Location: Birmingham, England

Re: Vostok - An analogue polyphonic synthesizer

Postby Halon » Sun Mar 28, 2021 3:51 pm

Actually, i forgot to name the presets. I should also add a few more, as well as some initial presets for those who want to make their own, although i didnt lock the first 10 presets though. Also i keep having new ideas for the synth so i keep adding new things. Will upload the final-final version soon. :lol:
Halon
 
Posts: 321
Joined: Sat Nov 28, 2015 4:42 pm
Location: Norway

Next

Return to User Examples

Who is online

Users browsing this forum: No registered users and 35 guests

cron