Support

If you have a problem or need to report a bug please email : support@dsprobotics.com

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

.osm syntesizer / Expert needed

For general discussion related FlowStone

.osm syntesizer / Expert needed

Postby sbk » Thu Mar 15, 2018 8:43 pm

Hi guys,

I have a very old .osm from synthmaker, which is a nice synthesizer (kind of)
I am not so experienced to complete it.

Long story short, I did some graphics for it, but I didn't know how to code them in synthmaker and the preset manager wasn't working so I asked someone else to do it for me. The synth never completed...

I am looking for someone to help me complete it. Right now it has not all knobs working (graphic wise), but all the modules are in it, it would just need someone make the grpahics and the presets work with preset manager.

I will have a reward for anyone who is willing to do it and get it to work as it should. It will be a nice little free synth

Let me know if anyone is interested.

Thanks,
Scott
Last edited by sbk on Fri Mar 16, 2018 5:32 pm, edited 1 time in total.
sbk
 
Posts: 3
Joined: Thu Mar 15, 2018 8:37 pm

Re: .osm syntesizer / Expert needed

Postby Spogg » Fri Mar 16, 2018 12:10 pm

Hi sbk

This sounds like a lot of work so I personally may not have time, but someone here might take on the challenge, especially if the GUI looks good to start with ;)

First, I would say upload what you have and folks can take a look…

Cheers

Spogg
User avatar
Spogg
 
Posts: 3318
Joined: Thu Nov 20, 2014 4:24 pm
Location: Birmingham, England

Re: .osm syntesizer / Expert needed

Postby sbk » Sat Mar 17, 2018 4:10 pm

Hi, thank you.

Here is the synth, as you can see many graphic elements are missing. But all the modules are inside it, they just need to be linked to the new graphical knobs buttons etc.

I hope anyone can help me on this one.

Thanks
sbk
 
Posts: 3
Joined: Thu Mar 15, 2018 8:37 pm

Re: .osm syntesizer / Expert needed

Postby adamszabo » Mon Mar 19, 2018 5:03 am

Where is it?
adamszabo
 
Posts: 657
Joined: Sun Jul 11, 2010 7:21 am

Re: .osm syntesizer / Expert needed

Postby sbk » Tue Mar 20, 2018 12:32 am

here, some knobs and dropdown menus (or drag up and down ) are missing and the presets aren't working
:) thanks
Attachments
skanalog.jpg
skanalog.jpg (118.32 KiB) Viewed 13916 times
sbk
 
Posts: 3
Joined: Thu Mar 15, 2018 8:37 pm

Re: .osm syntesizer / Expert needed

Postby Spogg » Tue Mar 20, 2018 8:52 am

Well it looks nice but we need the schematic in order to see what we can do!

Cheers

Spogg
User avatar
Spogg
 
Posts: 3318
Joined: Thu Nov 20, 2014 4:24 pm
Location: Birmingham, England

Re: .osm syntesizer / Expert needed

Postby Walter Sommerfeld » Tue Mar 20, 2018 1:47 pm

Scott check ur PM...

Cheers

Walter
User avatar
Walter Sommerfeld
 
Posts: 249
Joined: Wed Jul 14, 2010 6:00 pm
Location: HH - Made in Germany


Return to General

Who is online

Users browsing this forum: No registered users and 50 guests

cron