Page 1 of 1

HID detection problem

Posted: Thu Sep 28, 2017 10:22 am
by tester
In regards to HID I'm green, so I don't know how to understand this.

There is this schematic for HID devices detection:
viewtopic.php?f=84&t=1564

And in Windows Device Manager, there are multiple devices recognized as "HID compatible".
And yet - Flowstones HID detector - does not list anything from these.

Recently, we got something called Cypress "CY8CKIT-059 - Psoc 5lp Usb Dev Board", and in their creator there is an example of a sort of HID mouse, i.e. when you connect it to USB - mouse pointer wanders left and right. But the board, although seen in Device Manager as hid - is also not detected in Flowstone.

So... what are the requirements for HID compatible devices in Flowstone?

*

And what can be send via HID anyway? I'm thinking on making some cheap DAQ (under $25), and this cypress kit seems to be interesting choice because it can do a lot more.

My understanding is, that I can send from that unit numbered frames, that contain let say 1000 samples per frame. Thus at green slow tick it would make no big problem. or somehow else?