If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
Users are reminded of the forum rules they sign up to which prohibits any activity that violates any laws including posting material covered by copyright
more data acquisition drivers ?
more data acquisition drivers ?
by ffred » Wed Jul 07, 2021 7:58 am
I just discovered flowstone which I find rather interesting. I am considering using it, but my goal is more data acquisition and I find that the number of supported products seems a bit limited.
eg why are there only 2 Labjack products supported? why not the others?
Are drivers added from time to time for other products or do we have to manage by ourselves to use any DLLs supplied with these products?
thanks..
ffred
- ffred
- Posts: 2
- Joined: Wed Jul 07, 2021 7:47 am
Re: more data acquisition drivers ?
by aronb » Wed Jul 07, 2021 4:47 pm
If any products connect as HID devices (most do) AND you can get the data format (usually found in the product SDK/API, and programming examples), you can use the FlowStone HID Module to do the data decoding. It works quite well. The built in modules do exactly that as far as I can tell, because they are no faster or slower than using the built-in HID Module...
So, the most important thing is to look for the Labjack SDK info.
I have done this numerous times, and even with my own PIC Microcontroller products (8 channel 32 bit high speed encoders, 16 channel 12 bit ADCs, 16 In / 16 Out digital for example).
You can get about 100Hz read time, and with an adaptive filter, the noise reduction can both be done at the microcontroller, AND in FlowStone.
Aron
-
aronb - Posts: 154
- Joined: Sun Apr 17, 2011 3:08 am
- Location: Florida, USA
Re: more data acquisition drivers ?
by aronb » Fri Jul 09, 2021 1:21 pm
See this thread: http://www.dsprobotics.com/support/viewtopic.php?f=4&t=75177
It has some of the modules I use for noise reduction.
Additionally, (for example) you can get the change of signal amplitude (subtract last sample from previous), and use that data to make a decision on "how much filter" to apply to the signal. Some really nice controls can be made thinking with sample AND sample time data...
You can get quite crafty with the design of these types of filters with knobs (internal GUI type or external ADC type), such that you can have fine control normally, AND have coarse control when turning the knob quickly. As such, the signal responds quickly for high amplitude changes, and filters noise during relatively small changes.
Good Luck,
Aron
-
aronb - Posts: 154
- Joined: Sun Apr 17, 2011 3:08 am
- Location: Florida, USA
Who is online
Users browsing this forum: No registered users and 79 guests