If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
upsampling Peaking Filters
2 posts
• Page 1 of 1
upsampling Peaking Filters
I am stumped.
Is there a way to upample a filter so when working on a 44.1 sample rate you can successfully have a peak filter at a higher center frequency higher then cutoff?
For example when working at 44.1, have a peaking filter with a center frequency at 24KHz, that is upsampled then downsample and plotted at sample rate. At 44.1, 24KHz will be over the cutoff (1) and will not work.
I havent been able to figure out a way to do this in Flowstone.
Is there a way to upample a filter so when working on a 44.1 sample rate you can successfully have a peak filter at a higher center frequency higher then cutoff?
For example when working at 44.1, have a peaking filter with a center frequency at 24KHz, that is upsampled then downsample and plotted at sample rate. At 44.1, 24KHz will be over the cutoff (1) and will not work.
I havent been able to figure out a way to do this in Flowstone.
- regressor18
- Posts: 12
- Joined: Thu Jun 25, 2015 3:23 pm
Re: upsampling Peaking Filters
Dunno if you can do this well ... though, MIM method works in this well even without up-/down sampling.
- juha_tp
- Posts: 57
- Joined: Fri Nov 09, 2018 10:37 pm
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 59 guests