Simple Gain Compensation thing

[Wishx]

Hey I'd like to have an automated gain in a overdrive that will
copensate the drives gain knob. What I mean is when I turn the over drive to 2 I need a gain (volume only) knob before it hits the output to be -2, that ofcourse beeing interactive with the original drive know so I don't have to adjust the value all the time!

I'm sure that you can help me with this !

[Wishx]

anyone ?

[Wishx]

Seems my description is not clear, I mean use a overdrive but not have an icrease or decrese in level just a THD/ Distortion effect with no gain increase/degrease

[RJHollins]

Hi Wishx,

To get some help on this, you should really post up a schematic of what you have going.

[Wishx]

Hi Wishx,

To get some help on this, you should really post up a schematic of what you have going.

Hey I mean in the default overdrive design, just that realy

[Nubeat7]

Hey I'd like to have an automated gain in a overdrive that will
copensate the drives gain knob. What I mean is when I turn the over drive to 2 I need a gain (volume only) knob before it hits the output to be -2, that ofcourse beeing interactive with the original drive know so I don't have to adjust the value all the time!

I'm sure that you can help me with this !

this will be not that easy, because when you turn the amp value to 0 you hear nothing so -2 will not have the effect you want, so i would recommend to transfer values to db, you can find different transferfunctions in steph tfs ` knob examples here:
viewtopic.php?f=3&t=641&start=50

maybe it would be easier to have 2 knobs, one for drive and one for volume...

you can find infos on gainreduction here:
http://www.synthmaker.co.uk/forum/viewt ... ion#p80885

[Wishx]

Hey I'd like to have an automated gain in a overdrive that will
copensate the drives gain knob. What I mean is when I turn the over drive to 2 I need a gain (volume only) knob before it hits the output to be -2, that ofcourse beeing interactive with the original drive know so I don't have to adjust the value all the time!

I'm sure that you can help me with this !

this will be not that easy, because when you turn the amp value to 0 you hear nothing so -2 will not have the effect you want, so i would recommend to transfer values to db, you can find different transferfunctions in steph tfs ` knob examples here:
viewtopic.php?f=3&t=641&start=50

maybe it would be easier to have 2 knobs, one for drive and one for volume...

you can find infos on gainreduction here:
http://www.synthmaker.co.uk/forum/viewt ... ion#p80885

Thank you, I will have a look and see what I come up with. Will let you know if something comes up

[Wishx]

Deleted my previous reply so he re is a schematic of how this works manualy, now what needs to be done is the for example having the fr in christians vst analyzer stable at 0 changing only the THD. Can't figure out how to use this sort of ;auto gain; thing

[Nubeat7]

i would leave the vol inside to adjust the main vol but you can adjust the drive vol down while turning drive up like this:

overdrive voladj.fsm

(8.75 KiB) Downloaded 920 times

hope this helps