If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
Users are reminded of the forum rules they sign up to which prohibits any activity that violates any laws including posting material covered by copyright
Phidgets SBC
1 post
• Page 1 of 1
Phidgets SBC
by admin » Thu Nov 17, 2011 12:09 am
The Phidgets SBC (Single Board Computer) basically allows multiple Phidgets to be connected over Ethernet.
In the latest version of FlowStone this feature has been added so that the standard Phidget Modules in FlowStone can also connect to the Phidgets via the SBC. The only change is to specify the Server ID and serial number of the Phidget you want to connect to.
Here is how to set it up:
1) Install the Phidgets Control Panel software on your PC.
2) Connect your SBC to the local network or directly to the PC (I would avoid using wireless at this stage!)
3) Open the Phidgets Control panel and click on the SBC tab:
Check that the SBC is found on your network?
4) Click on the WebService Tab: Then the Bonjour Tab
Check that you Phidgets have been found and that the WebService is RUNNING!
5) Note down the Server ID and the Serial numbers of your Phidget Devices.
6) Open the new FlowStone V1.1.5
7) Drag in your Phidget devices
8) Add the correct Server ID and Serial numbers for the Phidgets:
9) Send a Trigger Start to each module and check that the Phidget is ON using a Bool on the On output.
Done!
In the latest version of FlowStone this feature has been added so that the standard Phidget Modules in FlowStone can also connect to the Phidgets via the SBC. The only change is to specify the Server ID and serial number of the Phidget you want to connect to.
Here is how to set it up:
1) Install the Phidgets Control Panel software on your PC.
2) Connect your SBC to the local network or directly to the PC (I would avoid using wireless at this stage!)
3) Open the Phidgets Control panel and click on the SBC tab:
- SBC1.jpg (87.02 KiB) Viewed 15374 times
Check that the SBC is found on your network?
4) Click on the WebService Tab: Then the Bonjour Tab
- SBC002.jpg (104.6 KiB) Viewed 15374 times
Check that you Phidgets have been found and that the WebService is RUNNING!
5) Note down the Server ID and the Serial numbers of your Phidget Devices.
6) Open the new FlowStone V1.1.5
7) Drag in your Phidget devices
8) Add the correct Server ID and Serial numbers for the Phidgets:
- SBC Test clip-3.png (69.49 KiB) Viewed 15373 times
9) Send a Trigger Start to each module and check that the Phidget is ON using a Bool on the On output.
Done!
- Attachments
-
SBC Test.fsm- (9.15 KiB) Downloaded 2141 times
-
admin - Site Admin
- Posts: 231
- Joined: Tue May 11, 2010 6:30 pm
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest