Support

If you have a problem or need to report a bug please email : support@dsprobotics.com

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

Users are reminded of the forum rules they sign up to which prohibits any activity that violates any laws including posting material covered by copyright

Module Name

For general discussion related FlowStone

Re: Module Name

Postby deraudrl » Fri Jan 24, 2020 4:47 pm

Spogg wrote:I don’t have the definitive answer but I do know that anything tagged as a Property (for viewing in the P view) will NOT be synchronised. Also the parent view size for any synced module won’t copy to the others. The synced modules name can also be changed for each module. So you could have Osc 1, Osc 2 etc but all still synced.

I think pretty much everything else will be synced, based on my experience.
Ok, that's not as bad as I suspected...probably need to run a couple of small experiments as soon as the new box of Round Tuits shows up from Amazon.
I keep a pair of oven mitts next to my computer so I don't get a concussion from slapping my forehead while I'm reading the responses to my questions.
deraudrl
 
Posts: 239
Joined: Thu Nov 28, 2019 9:12 pm
Location: SoCal

Re: Module Name

Postby Spogg » Sat Jan 25, 2020 9:48 am

Syncing is a great boon when developing. You change something and all the synced modules change. So you do it just once.

If you change properties in say a knob, they won’t copy over to the other knobs. My solution is to cut with cntrl-x then cntrl-v to paste it back, and then reconnect it. That action updates all the other knobs and their placement on the view is unchanged.

Be careful if you adjust the placement of an element using the control and drag (for fine control). If you get the sequence wrong (click then hold cntrl), the positions will not be accurately synced. Again, the solution is the same: you cut and paste back the knob that’s in the correct position and the others, somewhat magically, all come into line again.

Cheers

Spogg
User avatar
Spogg
 
Posts: 3358
Joined: Thu Nov 20, 2014 4:24 pm
Location: Birmingham, England

Previous

Return to General

Who is online

Users browsing this forum: No registered users and 131 guests