Cant find the problem trying to fix one of my synths.

djbrynte · Post by **djbrynte** » Fri Aug 07, 2015 4:52 pm

When i change the octave on a bass from -12 to 0 then to +12 and gdoing this back and down.

I have diffrent sound from the synth even if it should be the same.

Can i fix this problem some how?

Also when i change preset synth is clicking what can cause this problems?

Spogg · Post by **Spogg** » Sat Aug 08, 2015 3:12 pm

Hi djbrynte

Not sure about the first issue but it might be a naming problem. Every preset parameter (knob, menu selector etc.) must have a unique name.

The other issue of clicking might be solved with the simple idea below.

Cheers

Spogg

djbrynte · Post by **djbrynte** » Sat Aug 08, 2015 4:38 pm

THere is one problem still. when chaning presets its very slow :/

djbrynte · Post by **djbrynte** » Sat Aug 08, 2015 5:53 pm

Thank you but i have bigger problem its lagging when changing presets :S Also even high cpu.

Spogg · Post by **Spogg** » Sun Aug 09, 2015 11:45 am

Hi

This isn't easy to resolve without seeing your schematic unfortunately.

Your high CPU could be down to denormals: residual calculations processing very low levels of data loading the CPU.

Look at this link:

viewtopic.php?f=4&t=2808&hilit=denormal#p14872

Also, what is your PC's basic spec? Is it up to the task you have given it?

Cheers

Spogg

Cant find the problem trying to fix one of my synths.

Cant find the problem trying to fix one of my synths.

Re: Cant find the problem trying to fix one of my synths.

Re: Cant find the problem trying to fix one of my synths.

Re: Cant find the problem trying to fix one of my synths.

Re: Cant find the problem trying to fix one of my synths.