Quilcom LAP STEEL

Post any examples or modules that you want to share here
Post Reply
User avatar
Spogg
Posts: 3379
Joined: Thu Nov 20, 2014 4:24 pm
Location: Birmingham, England
Contact:

Quilcom LAP STEEL

Post by Spogg »

Back in 2023 I made a lap steel guitar plugin. It worked, but was so difficult to play live that I abandoned it. In the meantime, I’ve had requests to release it anyway! I came to realise that there were several commercial sample-based lap steel guitar plugins on the market and, from what I could see, these were also difficult to play live. So, I decided to revisit the project and came up with many changes and additions to the original. It’s a bit easier to play now, but still difficult I would say. You’ll no doubt need to finely edit your work in your DAW to get good results.

Download:

https://www.dropbox.com/scl/fi/1ot2gtqt ... pano9&dl=0

Video:

https://youtu.be/GqOaUOURnrQ
billv
Posts: 1176
Joined: Tue Aug 31, 2010 3:34 pm
Location: Australia
Contact:

Re: Quilcom LAP STEEL

Post by billv »

Awesome Spogg, Lap Steel was great idea :D . I always wanted one so I bought one for only $149 from
Klicka.com(https://www.klika.com.au/. It goes great, if your learning lap steel for the first time, it's a good deal. If you end up hating it, the financial loss is minimal. ;)
Sounds great Spogg, you are very much in the Ballpark with this one. Easily use this in a recording session, and get away with it. Good job. :D
User avatar
Spogg
Posts: 3379
Joined: Thu Nov 20, 2014 4:24 pm
Location: Birmingham, England
Contact:

Re: Quilcom LAP STEEL

Post by Spogg »

Thanks Bill!
Post Reply